Parker 406LXR Series, Product Manual

Page: 26 / 68

Parker Hannifin Corporation
EMN Automation - Parker
Irwin, Pennsylvania
22
406LXR Series Product Manual Chapter 3 - Setup and Usage
Mounting Surface Requirements
Proper mounting of the 406LXR is essential to optimum product
performance. All specifications are based on the following conditions:
•
The positioner must be bolted down along its entire length.
•
The positioner must be mounted to a flat, stable surface, with a flatness error less than or equal to
0.013mm/300mm.
•
Catalog specifications may deviate for positioners mounted to surfaces that do not meet the above
conditions.
•
If the surface does not met these specifications the surface can be shimmed to comply with these
requirements.
•
If mounting conditions require that the table base is overhung , table specifications will not be met
over that portion of the table. Additionally, in X - Y Systems the overhung portion of the Y - axis may
not met specifications due to the additional error caused by deflection and non - support of the base.
Contact Parker for guidelines on specifications of overhang applications.
Mounting Methods
T
he 406LXR can be mounted via the three (3) following methods:
1. Toe Clamps, figure A
2. Thru - Holes inside LXR, figure B
3. Taped Holes on the underside of the LXR, figure C