HY13-1597-01/US
3Z Motor Service Procedure
3ZG Series
Parker Hannifin Corporation
Hydraulic Pump & Motor Division
Greeneville, TN 37745 US
17
Assembly
NOTE
Torque Bolts into Output
Shaft Endcover
NOTE
Rotate Motor
Reinstall Drive Link
Figure 31
Figure 32
Grease all six bolts of the
output shaft endcover with
Loctite prior to wrenching/
torqueing them down.
(Figure 31)
Insert bolts into output shaft
endcover and torque down to
222—266 lb-in. (Figure 32)
Remember to tighten bolts
down in star pattern. (Figure 33)
Flip motor over in vice so the
output shaft is facing down.
(Figure 34)
Wipe surface clean of oil and
debris. Then, install the drive
link. (Figure 35)
Figure 34
Figure 33
Figure 35
