background image

   English

7 / 14

   ATT060-090  

ENERGY SAVING

000000009€

Steps to enable these functions:
1. Press 

PRG 

than

 USER 

than

 SETTINGS 

than 

OTHER

.

Th

  is Screen appears:

U12 -  BACKLIGHT  ON:          NO
U13 -   Enable Money    :          NO
U14 -   Money  :  Euro
U15 -   Money / KWh     :       0.120
U16 -   Saving Compared
to Heatless

U2

2. Parameter 

U12- Enable Money

: to enable the energy saving with 

money change in 

YES 

and press enter to confi rm.

3. Parameter 

U13- Money

: choose the money symbol:

Symbols available:

Parameter

Description

Simbol

Euro

euro

USA Dollar

U.S. dollar

ENG Pound

English pound

JAP Yen

Japanese yen

SCAN Krone

Krone

RUS Rublo

rublo

4. Parameter 

U14- Money/KWh

: conversion factor for the calculation 

of the currency. On default  “0.12” between euro and KWh.
5. Parameter 

U15- Saving Compared to

: permit the selection of the 

machine is comparable, chose between Heatless, Heat Regenerated, 
Blower.

NOTE: Th

 e symbol 

 appears only when the units is in 

ON

.

5.5  Alarms and warnings

•  Alarms have the eff ect of turning off  the refrigeration circuit (the 
dryer is never completely blocked).
• Th

  e warnings only give an signal.

•  In case of alarms or warnings contact the supplier.
• Th

  e alarm list is on see par. 7.

5.5.1 ALARM AND WARNINGS

In case of alarms:

1. Th

 e key   became red.

2.  on display press the key 

. Appears the alarm code “fl ashing”.

Press the key “

” to reset the alarm (only aft er the disappearance of the 

alarm condition).

 

6 Maintenance

a) Th

  e machine is designed and built to guarantee continuous opera-

tion; however, the life of its components depends on the maintenance 
performed.

b)  

When requesting assistance or spare parts, identify the ma-

chine (model and serial number) by reading the data plate located on 
the unit. 
c)  Circuits containing 3 kg or more of refrigerant fl uid are checked to 
identify leaks at least once a year.
Circuits containing 30 kg or more of refrigerant fl uid are checked to 
identify leaks at least once every six months. ((EU) No. 517/2014 art. 
4.3.a, 4.3.b).
d)  For machines containing 3 kg or more of refrigerant fl uid, the opera-
tor must keep a record stating the quantity and type of refrigerant used, 
an quantities added and that recovered during maintenance operations, 
repairs and fi nal disposal ((EU) No. 517/2014 art. 6). An example of this 
record sheet can be downloaded from the site: www.dh-hiross.com.An 
example of this record sheet can be downloaded from the site: www.dh-
hiross.com.

6.1 General instructions

!

 Before any maintenance, make sure:

•  the pneumatic circuit is no longer pressurized;
•  the dryer is no longer powered.

Always use the Manufacturer’s original spare parts: otherwise the Man-
ufacturer is relieved of all liability regarding machine malfunctioning

In case of refrigerant leakage, contact qualifi ed and authorized per-

sonnel.

Th

  e Schrader valve must only be used in case of machine malfunc-

tion: otherwise any damage caused by incorrect refrigerant charging will 
not be covered by the warranty.

6.2 Refrigerant

Charging: any damage caused by incorrect refrigerant replacement 

carried out by unauthorized personnel will not be covered by the war-
ranty.

Y

 Th

  e equipment contains fl uorinated greenhouse gases.

At normal temperature and pressure, the R407c refrigerant is a colour-
less gas classifi ed in SAFETY GROUP A1 - EN378 (group 2 fl uid ac-
cording to Directive PED 2014/68/EU);
GWP (Global Warming Potential) = 1774.

In case of refrigerant leakage, ventilate the room.

6.3 Desiccant agent

Th

  e desiccant agent used is not harmful; during the fi lling and emptying 

of the tanks, observe the following warnings:
a) wear a dust mask and protective goggles
b) If the material is accidentally dispersed to the ground, immediately 
clean 

Risk of slipping.

Summary of Contents for Antares ATT Series





























































Reviews: