ParaZero SafeAir M-600 Pro Installation Manual Download Page 3 | Manualshive

Page: 3 / 23

background image

SafeAir™ M-600 Pro Installation Guide

3

www.parazero.com

Important Notice

ParaZero’s drone safety system is a risk-mitigation system that aims to lower the impact energy in proper use. ParaZero’s
drone safety system is not intended to eliminate all damages to people or property and Parazero cannot guarantee
this. ParaZero’s drone safety system is a ballistic system that uses a pyrotechnic component. Please note, you must
read, comply with and apply all written information in this manual. The responsibility of proper use of the drone safety
system is on the user itself.

Copyright © 2020 ParaZero Drone Safety Systems. All rights reserved.

All intellectual property rights in this publication are owned by ParaZero Drone Safety Systems and protected by
applicable copyright laws and international treaty provisions. ParaZero Drone Safety Systems retains all rights not
expressly granted. No part of this publication may be reproduced in any form whatsoever or used to make any derivative
work without prior written approval by ParaZero Drone Safety Systems. All other trademarks are the property of their
respective owners. Other company and brand products and service names are trademarks or registered trademarks
of their respective holders

.

Document Information

SafeAir M-600 Pro Installation Guide
Number of pages: 23
Applicable models: SafeAir M-600 Pro
Last update: October 22, 2020
Version: 1.01

Contact Information

Tel – +972-36885252
30 Dov Hoz
Kiryat Ono, Israel 5555626

www.parazero.com

About This Guide

This guide describes the installation of the ParaZero SafeAir M-600 Pro drone safety system that is
compatible for your DJI M-600/ 600PRO drone.

«
1
2
3
4
5
...
»

Summary of Contents for SafeAir M-600 Pro
























Reviews:

No comments

Related manuals for SafeAir M-600 Pro

Brand: Jetmaster Pages: 17

Brand: Qube Pages: 19

Brand: IBM Pages: 12

Brand: VDO Pages: 91

Brand: Vega Pages: 68

Brand: Eachine Pages: 44

Brand: Padwico Pages: 28

Brand: Hama Pages: 10

Brand: Hama Pages: 6

Brand: NeuLog Pages: 4

Brand: Alpine Pages: 69

Brand: Allen Sports Pages: 2

Brand: Takex Pages: 11

Brand: GF Pages: 8

Brand: SpectraLink Pages: 51

Brand: Matrix Orbital Pages: 60

Brand: Lambrecht Pages: 11

Brand: Peco Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands