11
5.2
Connecting the Parachute System to the
Drone
Caution
During all installation stages, be sure –
Not to connect the batteries to the drone.
That the safety pin remains in its proper place.
Important Notice: When connecting to a Matrice 600 (Not Pro), it is required to move the GPS
antenna and reconfigure its position in the DJI assistant.
1
Gently turn back the drone on its legs.
2
Position the parachute system above the center plate,
in the correct orientation as seen in the picture below.
The two motors colored in red, and the arrows on the
GPS antenna show the front side of the M-600.
3
Extract the original screws near the arms positioned near
each of the SafeAir legs.
4
Connect all 4 legs to the main plate of the drone, each
with 3 screws. Before screwing them, apply some Loctite
to the screws.
