background image

Information

To pr
epar

Ser

ve

Help

Technology

Description of functions

Gener

al

34

9.  Description of functions

8.2  Getting out of the vehicle using the lift

 

Park the vehicle safely on a level surface ensuring a sufficient gap to any obstuctions. 

 

Open the rear sliding door on the passenger´s side (when the door is closed the cassette lift cannot be 

ectended for safety reasons).

 

Extend the plarform out of the cassette.

 

The pladform is raised to the lebel og the internal floor of the vehicle, and if necessary the ramp folds out, 

forming a lecel surface between the olafrom, ramp an internal floor of the vehicle. 

 

Driving the wheelchair forwards onto the plafdorm and position in entrally (with your back to the vehicle).

 

Lower the platform to the ground.

 

Fold out the roll stop device by pressing the button on the wired remote control. When using a wireless 

remote contorl, the roll stop device folds out automatically.

 

Drive the wheelchair off the platform.

 

Put the platform away. This is simply a matter of pressing the approproate button (if an electircal ramp 

is  fitted, this folds up first and you need to press the button once more). The platform then automatically 

moves to the precise retraction position.

 

When you press the button again, the platform automatically retracts until it is fully stowed away in the 

cassette.

 

Close the sliding door.

 

This concludes the unloading procedure.

If you use the cassette lift with the ignition on, a warning tone will yound to aler you to this.

Summary of Contents for Cassette lift





























































































Reviews: