Customer Guide
HPAC Cell Cleaning
©2015 Parata Systems, LLC
page 27 of 40
Parata Technical Assistance Center
120-0465 Rev 03
1-888-PARATA1 (727-2821)
6.8
Leaving the cell door open, insert the cell into the Mini and initiate a manual fill
for
0
pills. Refer to the Mini Operator’s Guide for instructions on creating a
manual fill.
Note
This process forces air through the cell to remove any remaining moisture.
6.9
Visually inspect the cell:
•
If you see any moisture inside the cell
, allow it to continue air-drying.
Do not
proceed until the cell looks completely dry.
•
If the cell looks completely dry
, continue to step 6.10.
6.10
Clear any fill errors and remove the cell from the unit.
7.
Reassemble the cell:
7.1
Remove the drying cloth from the cell.
7.2
Install a new pleated breather:
7.2.a
Obtain a new pleated breather from the cleaning kit.
Step 7.2.a
The breather has a “tab end” (A) and a “flat end”
(B). It fits into the opening on top of the cell with
the tab end toward the cell door.
