Customer Guide
HPAC Cell Cleaning
©2015 Parata Systems, LLC
page 23 of 40
Parata Technical Assistance Center
120-0465 Rev 03
1-888-PARATA1 (727-2821)
5.2
On the Prescription side monitor, touch the P
AUSE
button to put the unit in Pause
mode.
5.3
On the Chute Map, touch the icon for the chute you want to remove. The chute
light will flash white, and the solenoid will retract.
Step 5.3
Chute Map with the icon unselected (left) and selected (right)
5.4
Pull the chute assembly out of the unit.
5.5
Clean the chute assembly.
Note
Refer to “Appendix: Cleaning the chute” on page 34 for instructions on
disassembling and reassembling the chute.
5.6
Install the clean chute assembly.
Note
It is recommended that you install the chute before inserting the clean cell in
the Mini.
5.6.a
Insert the chute assembly and tighten the screw with the T-handle
driver.
5.6.b
Touch the chute icon on the Chute Map to deselect it.
