3
YOU MUST WEAR PROTECTIVE
RUBBER GLOVES. DO NOT HANDLE A
HOT LAMP OR SERIOUS BURNS WILL
OCCUR. DO NOT TOUCH THE GLASS
PART OF THE LAMP AS BODY OILS
WILL CREATE HOT SPOTS & GREATLY
SHORTEN LAMP LIFE. (Fig. 11)
4. Carefully lift the lamp(s) from the
quartz tube. Set aside in a safe
area to avoid breaking or chipping
the lamp(s) (Fig. 11).
5. Turning counter clockwise,
unscrew the round aluminum
sealing nut. If there isn’t enough
clearance to unscrew the
aluminum sealing nut, unscrew
one side of one ballast and loosen
the screw on the other side (Fig.
12). Swing ballast out of the way
to get a better grip or to use a
tool. Remember to replace ballast.
6. Carefully lift the compression
washer from the top of the quartz
tube making sure not to lose the
black gasket that cushions the
edge of the quartz tube (Fig 13).
7. Wearing protective rubber gloves,
hold quartz tube with both thumbs
inside and pull up (Fig. 14). Once
the O-ring breaks free, the quartz
tube should lift out easily (Fig.
15). Warning: The quartz tube is
fragile, be sure to handle it with
proper care and do not set it down
on a hard surface.
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 11
