background image

Page 6

Locating Appliance

DUE TO HIGH TEMPERATURES, THIS ELECTRIC APPLIANCE SHOULD BE LOCATED OUT OF

TRAFFIC. KEEP COMBUSTIBLE MATERIALS SUCH AS FURNITURE, PILLOWS, BEDDING, PAPERS,

CLOTHES AND CURTAINS AT LEAST 36” FROM THE FRONT OF THE APPLIANCE.

NEVER LOCATE THIS ELECTRIC APPLIANCE WHERE IT MAY FALL INTO A BATHTUB OR OTHER 

WATER CONTAINER.

WEAR SAFETY GLOVES AND SAFETY GLASSES FOR PROTECTION DURING INSTALLATION AND

MAINTENANCE.

TO PREVENT CONTACT WITH SAGGING OR LOOSE INSULATION, THE ELECTRIC APPLIANCE

MUST NOT BE INSTALLED AGAINST VAPOR BARRIER OR EXPOSED INSULATION. LOCALIZED

OVERHEATING COULD OCCUR AND A FIRE COULD RESULT.

DO NOT EXPOSE THE ELECTRIC APPLIANCE TO THE ELEMENTS (SUCH AS RAIN, ETC.)

WARNING

This appliance is for use on 120 Volts. The cord 

has a plug as shown in (A). An adapter as shown 

in (C) is available for connecting three-blade 

grounding type plugs to two-slot receptacles. The 

green grounding lug extending from the adapter 

must be connected to a permanent ground such 

as a properly grounded outlet box. The adapter 

should not be used if a three-slot grounded 

receptacle is available. 

To disconnect appliance, turn controls to off, then 

remove plug from outlet.

METAL SCREW

(A)

NOT ALLOWED IN CANADA

GROUNDING

MEANS

ADAPTER

GROUNDING PIN

COVER OF 

GROUNDED

OUTLET BOX

(C)

(B)

GROUNDING METHODS

Grounding Appliance

01.18.19

Summary of Contents for EF-WM353 MO

























Reviews: