Page 12
Option 2: Hanging the Appliance on the Wall
Due to the many different materials used on different walls, it is highly
recommended that you consult your local builder before you install this
appliance on the wall.
1. Select a location that is not prone to moisture and is located at
least 36” (914mm) away from combustible materials such as curtain
drapes, furniture, bedding, paper, etc.
2. Have two people hold the appliance against the wall to determine the
location.
3. Remove the bracket from the back of the unit by removing the two
screws, refer to Figure 1.
4. Mark out location, then mount the bracket onto the wall using the 8
supplied screws. This bracket MUST have the hooks facing upward
and be level.
WALL MOUNT
BRACKET
SCREWS
HOOK
HOOK
NOTE: It is strongly recommended
that the mounting bracket be
screwed into the wall studs where
possible. If the wall studs cannot
be used, ensure that the supplied
plastic anchors are used to
the
bracket to the wall and the bracket
is adequately secured.
5. With the wall mounting bracket installed have two people lift the appliance up and insert the two
hooks on the bracket into the two slots on the back of the appliance.
6. Check the appliance for stability ensuring that the bracket will not pull free from the wall.
BODY
FRONT
GLASS
SIDE VIEW
Figure 1
Bracket
01.18.19