background image

1

WS-415-131 / A / 09.11.00

Fax:

 (705)722-6031       

Email:

 [email protected]

Web:

 www.napoleon.on.ca

Wolf Steel Ltd., RR#1, 9 Napoleon Rd.,

Barrie, ON., Canada  L4M 4Y8  (705)721-1212

INSTALLER: THESE INSTRUCTIONS MUST BE CONVEYED TO AND REMAIN WITH THE HOMEOWNER

CERTIFIED UNDER AMERICAN NATIONAL STANDARDS, ANSI Z21.11.2b, VOLUME II FOR UNVENTED ROOM HEATERS.

UNVENTED MILLIVOLT SYSTEM

INSTALLATION AND OPERATION INSTRUCTIONS FOR

UNVENTED GAS FIREPLACE - GVF30

NATURAL GAS 

 MODEL

 

GVF30-N

PROPANE GAS  

MODEL

 

GVF30-P

CERTIFIED FOR THE UNITED STATES USING ANSI / AGA METHODS

WARNING:  If the information in these instructions is not followed exactly, a fire or

explosion may result causing property damage, personal injury or death.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapours and liquids in the vicinity of

this or any other appliance.

WHAT TO DO IF YOU SMELL GAS:

•  Do not try to light any appliance.
•  Do not touch any electrical switch.
•  Do not use any phone in your building.

•  Immediately call your gas supplier from a

neighbour's phone. Follow the gas
supplier's instructions.

•  If you cannot reach your gas supplier, call

the fire department.

Installation and service must be performed by a qualified installer, service agency or the
gas supplier.

This is an unvented gas-fired heater that uses air (oxygen) from the room in which it is
installed. Provisions for adequate combustion and ventilation air must be provided.

Summary of Contents for GVF30




















Reviews: