13
12
Pilots Manual for Parajet Maverick Lite Trike - © 2022 Parajet International Ltd
Pilots Manual for Parajet Maverick Lite Trike - © 2022 Parajet International Ltd
Ensure paracord runs freely through brace arm pulleys and
underneath chassis tube. Using provided mallions, attach
paracord to O-rings on front of harness using the correct setting
loop. Ensure paracord attachment is symmetrical on both sides.
Orientate outer-ring guard sections so mounts are facing
upwards. Insert nylon connector into the top cage section
and push together until the button clip engages and secures the
lower and top cage sections together. Repeat on opposite side.
1
2
To complete your Maverick Lite Trike setup, you only need to attach the paracord to the
harness to aid weight shift, and assemble the outer ring guard. When fully assembled, we
recommended you undertake a thorough check ensuring correct and secure assembly
of components, and that there is no sign of wear or damage to your equipment.
BUILD MY LITE TRIKE
FINAL FIXTURES & FITTINGS
Loop the velcro anchor strap around the rear axle, making
sure the strap isn’t twisted. Thread the loose tail end
through the plastic buckle located at the opposite end of the
anchor strap.
Place ring guard against Maverick cage with mounts facing
forward. Ensure each mount makes positive fitment over
cage ring. Loop ring straps around mount and cage ring, ensuring
each strap is taut and outer-ring securely fitted to cage.
3
Route the tail end of the anchor strap around the foot brace
of the Maverick airframe. Pull the anchor strap tight, before
looping strap back around the rear axle. Ensure the Velcro strip is
fastened securely with full contact. Repeat on opposite side.
Thread the plastic buckle down the anchor strap. Ensure
the buckle is sitting as flush to the rear axle as possible.
Holding the buckle, pull the tail end of the strap until tight.
5
6
4
Summary of Contents for MAVERICK
Page 1: ...LITE TRIKE MANUAL...
