Paradyne JetFusion Integrated Access Device User Manual Download

Page: 244 / 297

2000-A2-GB20-10

- 225 -

February 2004

set bridge
stp global

Description.

Enables or disables Spanning Tree Protocol globally.

set bridge stp global <on | off>

on | off

Keyword to enable (on) or disable (off) STP globally.

set dhcp
server
enable

Description.

Enables or disables DHCP server on the IAD.

set dhcp server enable <on | off>

on | off

Keyword to enable (on) or disable (off) DHCP server.

set dhcp
server
gateway

Description.

Sets the DHCP server default IP address.

set dhcp server gateway <IP address>

IP address

IP address of the DHCP server, in octal format (999.999.999.999)

set dhcp
server
subnet

Description.

Sets the DHCP server default subnet mask.

set dhcp server subnet <subnet mask>

subnet mask

Subnet mask in octal format (255.255.255.255)

set dhcp
server dns

Description.

Sets the DHCP DNS server IP address.

set dhcp server dns <IP address>

IP address

IP address in octal format (999.999.999.999)

set dhcp
server
netbios

Description.

Sets the DHCP NetBIOS server IP address.

set dhcp server netbios <IP address>

IP address

IP address in octal format (999.999.999.999)

set dhcp
server
domain

Description.

Sets the DHCP server domain name.

set dhcp server domain <domain name>

domain name

Fully-qualified domain name

Summary of Contents for JetFusion Integrated Access Device










































































































































































































































































































Search results

Summary of Contents for JetFusion Integrated Access Device

Reviews:

Related manuals for JetFusion Integrated Access Device

Brands by name

Popular brands

Paradyne JetFusion Integrated Access Device, User Manual

Search results

Summary of Contents for JetFusion Integrated Access Device

Reviews:

Related manuals for JetFusion Integrated Access Device

Brands by name

Popular brands