background image

8

 March 

2005

8335-A2-GZ40-60

Front Panel LEDs

The following table describes the meaning and states of the LEDs on the front 
panel.   

The 8375 and 8385 front panels, not displayed, have the same LEDs and 
designations as the 8355.

Type

LED

LED is . . . *

* Pulsing:  LED turns off momentarily once per second.

Slow Blinking:  LED turns on momentarily once per second.
Fast Blinking:  LED turns off and on in equal duration 4 times per second.

Indicating . . . 

SYSTEM

OK

Green, On

Off

Green,
Pulsing

Green, 
Fast Blinking

Card failure. System processing functions 
have stopped.

No power to card.

Card functioning normally. 

Firmware download needed.

Alrm

Amber, On

Off

Alarm is present on the card. ATM 
interface is not being detected.

Normal operation, no alarms.

Test

Amber, On

Off

Amber, 
Fast Blinking

Test in progress.

Normal operation, no tests.

Self-test is in progress.

ATM BUS

TX

Off

Green,
Fast Blinking

Inactive.

Cells are being transmitted.

RX

Off

Green,
Fast Blinking

Inactive, link down.

Cells are being received.

LOC

Amber, On

Off

Loss Of Clock. ATM bus clock signal is not 
present.

Normal operation.

DSL PORT

8335

8365

24-Port 
Models

1/9–8/16

1–12

1/13–12/24

Green, On

Off

Green, 
Slow Blinking

Green, 
Fast Blinking

Good signal, unit is trained.

Port is disabled.

Port is in test, or is down.

Port is training.

ALT BANK 

8335

24-Port 
Models

9–16
1–8 

13–24
1–12

Off

Amber, 
Fast Blinking

The ports not currently displayed by the 
port status LEDs are functioning normally 
or are disabled.

One of the ports not currently being 
displayed by the port status LEDs is 
down, in test, or in training mode.

00-16661

ATM

SDSL

8335

SYSTEM

OK

Alrm

Test

TX

RX

LOC

1/9

2/10

3/11

4/12

AT

M

 B

U

S

DSL POR

T

5/13

6/14

7/15

8/16

POR

T

9/21

10/22

11/23

12/24

POR

T

ALT BANK

9-16

1-8

00-16719

G.DMT

G.Lite

8365

SYSTEM

OK

Alrm

Test

TX

RX

LOC

1

2

3

4

AT

M

 B

U

S

DSL POR

T

5

6

7

8

POR

T

9

10

11

12

02-17210

ATM

ReachDSL

8355

SYSTEM

OK

Alrm

Test

TX

RX

LOC

1/13

2/14

3/15

4/16

ATM B

U

S

DSL POR

T

5/17

6/18

7/19

8/20

POR

T

9/21

10/22

11/23

12/24

POR

T

ALT BANK

13-24

1-12

Summary of Contents for Hotwire 8335













Reviews: