background image

8335-A2-GZ40-60

March 2005

9

Logging In to the MCC Card

You can log in to the management card using either a local VT100- compatible 
terminal or a remote Telnet connection. 

After you enter your user ID and password, the system displays the Main Menu. 
See the 

Hotwire Management Communications Controller (MCC) Card, 

IP Conservative, User’s Guide

 for information about selecting the unit from the 

card selection screen.

 Entering Card Information

After accessing your line card for the first time, use the Card Information screen to 
configure basic information about the card. To access the Card Information 
screen, follow this menu selection sequence:

Configuration 

 Card 

 Card Info 

(

A-A-A

)

Configuring the DSL Ports

You can set the rate of the DSL ports from the DSL Port Configuration screen. To 
access the DSL Port Configuration screen, follow this menu selection sequence:

Configuration 

 Physical Ports 

 DSL Ports 

(

A-B-B

)

Configuring the ATM Parameters

You can configure ATM parameters from the ATM Parameters screen. To access 
the ATM Parameters screen, follow this menu selection sequence:

Configuration 

 ATM Switch 

 ATM Parameters 

(

A-E-A

)

Configuring ATM Cross Connection

You can configure VC connections from the line card to the endpoint with the ATM 
Cross Connect screen. To access the ATM Cross Connect screen, follow this 
menu selection sequence:

Configuration 

 ATM Switch 

 ATM Cross Connect 

(

A-E-B

)

Summary of Contents for Hotwire 8335













Reviews: