3
Safety Instructions
Read the
Important Safety Instructions beginning on page 25.
Installing the Power Supply and Cord
1. Insert the power supply’s 4-prong plug into the POWER jack.
When inserting the plug at the rear of the FrameSaver unit, align the plug with the
notch above the POWER jack. Make sure the locking tab snaps securely into the
jack.
2.
DSX
COM
POWER
MODEM
NET
DBM
P
O
R
T
2
P
O
R
T
1
ENET
POWER
P
O
R
T
1
00-16841
Power Cord /
Transformer
Insert the 3-prong plug
into an AC outlet.
OK
ALM
The front panel
OK LED lights.
2.
3.
3-Prong
Grounded
AC Outlet
Locking
Tab on
Top
3.
4. Plug the power cord into the grounded power outlet and check the LEDs.
If any LEDs light, you have power. If not, refer to
Troubleshooting in the User’s
Guide for possible explanations.
NOTE:
The rear panels shown in these instructions are for the Model 9128-II, which has
an Ethernet port. Except where noted, installation instructions are the same for the
Model 9128 without an Ethernet port.
