Maintenance and Troubleshooting
5-12
9121-A2-GB20-20
May 1998
Device Status Messages
These messages appear in the messages area at the bottom of the screens.
Message
What It Indicates
What To Do
Already Active
Test selected is already
running.
H
Allow test to continue.
H
Select another test.
H
Stop the test.
Backup Active
Backup has been
established and data is
flowing over the alternate
DLCI.
No action needed.
Blank Entries
Removed
New had been selected
from the Administer Logins
screen, no entry was made,
then Save was selected.
H
No action needed.
H
Reenter the Login ID,
Password, and Access Level.
Command Complete
Configuration has been
saved or all tests have
been aborted.
No action needed.
Please Wait
Command takes longer
than 5 seconds.
Wait until message clears.
Resetting Device,
Please Wait ...
Yes (or y) was entered in
the
Reset COM Port usage
field of the System Paused
menu.
No action needed.
Test Active
No higher priority health
and status messages exist,
and a test is running.
H
Contact service provider if test
initiated by the network.
H
Wait until the other test ends
and message clears.
H
Cancel all tests from the Test
screen ( Path: main/test ).
H
Stop the test from the same
screen the test was started
from.
