Maintenance and Troubleshooting
5-9
9121-A2-GB20-20
May 1998
Device Messages
All device messages are listed in alphabetical order.
Device Error Messages
These messages appear in the messages area at the bottom of the screens.
Message
What It Indicates
What To Do
Access level is
n.
1
Configuration is
Read-only.
User’s access level is 2
or 3; user is not authorized
to change configurations.
No action needed.
Duplicate DLCI
Number
DLCI number entered is not
unique for the port.
No action needed; previous
contents of the DLCI number
field is restored.
Destination Cannot Be
Blank
Destination field was
skipped when setting up an
ISDN Call Profile.
Tab to Destination, and enter a
unique 8-character destination
indicator (e.g., Florida).
Destination Not
Unique
Destination entered is
already being used.
Enter another destination
indicator.
Invalid Character (
x )
2
A non-valid printable ASCII
character has been
entered.
Reenter information using valid
characters.
Invalid – [
Test ]
Already Active
A test was already in
progress when it was
selected.
No action needed.
Invalid – [
CSU/ DTE ]
Network Initiated
Loopback Active
Network-initiated loopback
was in progress when CSU
(or DTE ) Loopback Start
was selected.
No action needed.
Selecting Abort All Tests from the
Test menu ( Path: main/test ) will
not interrupt a network-initiated
loopback.
Invalid Password
Login is required and an
incorrect password was
entered; access is denied.
H
Try again.
H
Contact your system
administrator to verify your
password.
Invalid – Phone
number must be at
least 7 digits
Fewer than seven numbers
were entered for the phone
number associated with the
BRI Service Profile ID
(SPID).
Enter additional number(s),
Tab to the Clear field, and reenter
the BRI phone number.
Invalid – SPID must
be at least 3 digits
Fewer than three numbers
were entered for the BRI
Service Profile ID (SPID)
configuration option.
Enter additional number(s),
Tab to the Clear field, and
reenter the SPID.
1
n is Access Level: 2 or 3.
2
x is the character not being accepted.
