DCP Operation
3-7
3910-A2-GN32-40
September 1998
Keypad
The DCP on the Model 3910 has seven keys while the optional SDCP of the COMSPHERE
3000 Series Carrier has eight keys. The additional key on the carrier is the
Select
key, used to
connect the SDCP to a specific slot in the carrier.
Key
The
key returns you to the Top-Level menu display from anywhere in the menu tree.
Pressing
while changing configuration options displays the message Save Straps? Yes No. If
No is selected, changes made to configuration options are not saved and the Top-Level menu
appears. If Yes is selected, then changes are saved to either Active (Saved), Customer 1, or
Customer 2 configuration areas.
Key
The
key moves you up one level in the menu tree.
and
Keys
Use the
and
keys to move the viewing window left or right and to scroll the remaining
branches and selections into view. A maximum of three selections can be displayed at one time.
These keys also allow you to move the cursor one character to the left or right on data entry
displays; for example, to allow entry of one digit at a time.
F1
F2
F3
Keys
Function keys select the LCD choice that appears above the function key; they are labeled F1, F2,
and F3. If a selection spans more than one function key, then any of those keys choose that
selection.
Select
Key (Model 3911 only)
The
Select
key appears on the optional SDCP of the COMSPHERE 3000 Series Carrier. It is
used to connect the SDCP to a modem in a specific slot in the carrier.