Control Branch
7-11
3910-A2-GN32-40
September 1998
After completing these actions, proceed to Implementing a Clone Remote Operation on
page 7-12.
Cloning a Multiple TMp Remote
F1
Choose DLL Type >
Single
Multiple
F2
F3
Press the F3 key to select Multiple Clone Remote.
After completing this action, proceed to Implementing a Clone Remote Operation on page 7-12.
Viewing Multiple TMp Clone Results
F1
Choose DLL Type >
MPtCloneResults
F2
F3
From the Choose DLL Type screen, press the
key until the MPtCloneResults screen appears
to view the results of the last multiple TMp clone operation. If the message Trib List Empty
appears, this indicates that a multiple download was never initiated.
F1
MPtCloneResults
Nxt xxx Pass
F2
F3
The address field (xxx) displays the network management address of one of the remote modems.
Pressing the F1 key allows you to select various remote modems to determine the download
result for those modems (Pass or Fail).
