Paradyne COMSPHERE 3610, Application Manual

Page: 165 / 238

B-1 3610-A2-GB41-70 July 1999
Configuration Worksheets
Overview B-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Instructions B-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overview
This appendix contains a complete set of Configuration
Worksheets used for the 3600 Series DSU and its options.
Each copy is specific to the DSU’s mode of operation:
TDM, MCMP, Bridge, and Basic mode. There is also a
Configuration Worksheet that applies to the DBM-V,
DBM-S, or DBM-D. These sets include the following:
•
Configuration Worksheet for TDM Mode, which is
used for the DSU with TDM. This worksheet
includes the DBM and SNA Diagnostic Interface
options, as well, so no other worksheet is required.
•
Configuration Worksheet for MCMP Mode, which
is used for the DSU with MCMP. This worksheet
includes the DBM and SNA Diagnostic Interface
options, as well, so no other worksheet is required.
•
Configuration Worksheet for Bridge Mode, which
is used for the DSU with TDM or MCMP. This
worksheet includes the SNA Diagnostic Interface
option, as well, so no other worksheet is required.
•
Configuration Worksheet for Basic Mode, which is
used when the TDM or MCMP circuit card is
disabled, for the DSU without options, or the DSU
with only the DBM and/or SNA Diagnostic
Interface options.
•
Configuration Worksheet for Basic (DBM-V,
DBM-S, or DBM-D) Mode, which is used for the
DBM-V, DBM-S, or DBM-D that is connected to
the TDM or MCMP operating in Bridge mode.
A Configuration Worksheet summarizes the
DSU-TDM’s or DSU-MCMP’s option sets, configuration
options, and configuration option values. An explanation
for each configuration option within each option set based
upon the DSU’s mode of operation is provided in the
Configuration Option Tables section in Chapter 6 of the
COMSPHERE 3600 Series Units, Models 3610 and 3611,
Operator’s Guide.
If more detailed configuration information is needed
when configuring the unit, refer to Configuration Options,
Chapter 6, of the COMSPHERE 3600 Series Units,
Models 3610 and 3611, Operator’s Guide.
Instructions
Configuration Worksheets can be used for reference, to
record changes made to the DSU’s configuration options,
or to record the configurations saved to the Usr1, Usr2, or
Usr3 areas of the DSU.
Make a copy of the appropriate Configuration
Worksheets provided in this appendix. Complete the
information at the top of each worksheet first. If you have
a Model 3610 (standalone) DSU with TDM or MCMP,
enter your site in the location field. If you have a
Model 3611 (carrier-mounted) DSU with TDM or MCMP,
enter the DSU’s carrier and slot location. If recording
Model 3611 DSU configurations, make a copy for each
DSU-TDM or DSU-MCMP.
Record the configuration or changes by circling the
appropriate configuration setting, either all of the
configuration options or all those that change from their
factory-loaded default values. Circle the appropriate
hardware strap settings as well.
B