Configuration Worksheet for Basic DSU Mode
Date:_______________________________________________
Location:____________________________________________
Local Phone Number: (
j
)________________________
Device:_____________________________________________
Local Address:________________________________________
j
DBM Installed
Serial Number:_______________________________________
Tributary Network Address:______________________________
j
SNA Diagnostic Interface (LPDA-2) Enabled
DSU
Configuration Options
Value
Rate(Kbps)
Auto, 64CC, 64L, 56, 38.4, 19.2,
9.6, 4.8, 2.4
PrtSp(Kbps)
D
64, 56, 48, 38.4, 32, 28.8, 24.0, 19.2,
18.8, 18.0, 16.8, 14.4, 12.0, 9.6, 9.2,
8.4, 7.2, 4.8, 4.4, 4.0, 2.4 , 2.0, 1.2,
Disab
TxClkSource
Int, RXC, Ext, DDS, Prt1, Prt2, Prt3,
Prt4, Prt5, Prt6
Msg Clamp
A
Enab, Disab
TxElasStor
Enab, Disab
RxElasStor
A
Enab, Disab
19.2 PowrLvl
DD
A
+ 6, 0, –10
64KScramblng
A
On, Off
64KLatchLpbk
A
On, Off
Net
I
ntf
A
AggSw, Forc, Disab
Net
I
Timing
A
Int, Net
I
, Prt1, Prt2, Prt3, Prt4, Prt5,
Prt6
V.54 Lpbk
A
Enab, Disab
Diagnostic DSU
Configuration Options
Value
Diag Type
NonD, Disr, Mixed, None
2nd Ch(bps)
A
100, 400, 800, 1200, 1600
Disr Type
2500, 2600, 3600s, 3600e, Br56
Diagnostic General
Configuration Options
Value
Position
Cntrl, Trib, G2Trb
LinkConfg
Pt-Pt, M-Pt
Resp Period
A
1, 2, 10
TribTimOut
A
sec to
min (5 sec to 10 min)
Diag Conn
CC, DC
Link Delay
A
0s, 1s, 2s, 5s, 10s, 20s, 50s
Network Delay
A
0s, 1s, 2s, 5s, 10s, 20s, 50s
Packet Delay
A
0s, 1s
,
2s, 5s
Extend Chan
A
Yes, No
Upstrm Port
A
Prt1, Prt2, Prt3, Prt4, Prt5, Prt6
M-PtSymPrt
A
Enab, Disab
Fast Sel
A
Enab, Disab
General
Configuration
Options
Value
DTE Port
EIA232, V.35
RTS Cntrl
FrcOn, DTE
CTS Cntrl
Std, = RTS
AntiStream
A
Disab, 1 – 100 sec
(async term = 0 –100)
LSD Lead
A
Std, Delay, FrcOn
CTS Lead
A
Std, Delay, FrcOn
DSR FrcOn
A
Enab, Disab
SystemStat
A
Enab, Disab
DSR on Tst
A
Enab, Disab
Circ Assur
A
Enab, Disab
Tst Pattern
A
AT&T, Std
RespondRDL
A
Enab, Disab
LL by DTE
A
Enab, Disab
RL by DTE
A
Enab, Disab
Bilat Lpbk
A
Enab, Disab
Ext Leads
A
ExtLd, Rate, RPowr
CCN by EL
A
Enab, Disab
DTR Alarm
A
Enab, Disab
SW Vers
A
3.24, 4.43, 6.66, Normal
AnswExtBU
A
Enab, Disab
Async
→
Sync
Enab, Disab
AsyncBit/Char
6, 7, 8, 9, 10
Stop Bits
1, 2
Overspeed
1.0, 2.3
PowerOnTst
Enab, Disab
LPDA-2
Configuration Options
Value
LPDA-2
Enab, Disab
LPDA Address
(1 – 256)
SNA Backup
Enab, Disab
Code 1
(6 digits)
Code 2
(7 digits)
ChgMd
Configuration Options
Value
Protocol Mode
DPII, ADp
S1 Hardware
Settings
Value
DBM Interface
LL
Permissive (ON), Programmable (OFF)
Frame Ground/
Signal Ground
Connected (ON), Disconnected (OFF)
EIA-232 Test Mode
Enable (ON), Disable (OFF)
V.35 Test Mode
Enable (ON), Disable (OFF)
D
When the Async
→
Sync configuration option is
enabled using the General branch, the following
PrtSp(Kbps) settings do not appear:
32, 24.0, 18.8, 18.0, 9.2, 8.4, 4.4, 4.0, and 2.0 kbps
DD
19.2 Power Level defaults to +6 dB when
App Module ID displays XLOOP
LL
V.32 Analog DBM only
A
Configuration options that do not appear when
Full mode is disabled using Menu from the
Configuration branch.
