8
May
2005
AIM2-A2-GZ40-20
Attaching RJ21 Connectors to the 12-Slot BLC
Procedure
1. Detach the hook and loop fastener strap from the RJ21 receptacle. Lift the
hook and loop fastener tab on the left and pull the strap open towards the
right, leaving it looped under the right side of the connector frame.
2. Slide the RJ21 plug of your ADSL cable underneath the hook and loop
fastener from the bottom, and press it firmly into the RJ21 receptacle on the
chassis.
3. Pull the hook and loop fastener strap to the right, making sure that it is snug
against the connector, then pull the strap back towards the left, such that the
hook and loop fastener layers stick to one another across the top of the
connector. Tuck the tab at the end of the strap down to the left of the connector
frame so that it is out of the way of other connections.
4. Screw the top of the RJ21 cable connector into the jackscrew at the top of the
RJ21 connector frame on the chassis.
