1862 VoIP IAD User’s Guide
STEP 2:
In the DHCP Relay field, select
Disable
, and enter the IP Address where you want
BOOT REQUEST or DHCP packets to be received from clients.
STEP 3:
Click on the
Apply
button.
6.6 NAT
The NAPT port redirect page is used to set up the virtual server. A virtual server has two access
ports: public and private. The public port is the open port where the Internet users access the
virtual server. The local port is the port on the LAN that the virtual server is really accessed. The
public port is translated to the local port to access to the virtual server.
Click on the
Add
button to add a virtual server. The following page displays after you click on
on
Add
.
Public Port
Enter the
public
port number. This port will be mapped or
redirected to the local port of the virtual on the LAN. Internet
users access the virtual server via the public port.
Protocol
Specify the protocol: TCP or UDP.
Local Address Enter the
IP address
of the virtual server on the LAN.
Local Port
Enter the
port
number
of the virtual server on the LAN.
53
Summary of Contents for 1862
