Page 13
Installation
Chapter 4: Installation
The following sections guide you through the steps required to install the
PCS200 and how to mount and connect the antenna.
Wall-Mount Installation
The PCS200 must be securely mounted on a wall or similar surface. It is
important to mount the metal box as far away as possible from any electronic
equipment. Ensure that the metal box is mounted as high as possible to
ensure protection from RF interference and to maximize the signal quality.
To Mount the PCS200:
1) Use the module as a template to mark the four holes onto the mounting
surface.
2) Drill the holes.
3)
Align the PCS200 and secure into place using the appropriate hardware,
as shown in Figure 3.
Figure 3
Mounting
Holes
Mounting
Hardware
