Paradox IPR512, Operation Manual

Page: 36 / 64

34 Chapter 5: System Configuration
Account Events
The following account events are pre-set in the system:
• Account supervision loss - sends a message to the monitoring station’s automation soft-
ware when communication is lost at the site, for more information, please refer to “Security
Profiles Menu” on page 26.
• Account supervision restore - sends a message to the monitoring station’s automation
software when communication has been restored at the site, for more information, please
refer to the “Security Profiles Menu” on page 26.
• Account registration - sends a message to the monitoring station’s automation software
when an account has been registered.
• Account deleted - sends a message to the monitoring station’s automation software when
an account has been deleted, for more information, please refer to the “View/Restore
Deleted Accounts Menu” on page 39
To Enable and Modify an Account Event
1. Select the Event you wish to modify from the list.
2. Click
Edit .
3. Select whether the event code will be reported. To not report an event, uncheck the
Reported check box.
4. Modify the Event code.
5. Click
Save to save your changes. To cancel any changes without saving, click Cancel .
Figure 32: Edit Existing Account Event
Table 12: Account Event Fields
Item Description
Event description Provides a description of the event.
Reported Defines whether the IPR512 Receiver will report special events to the monitoring
station’s automation software.
CID Defines the reporting code assigned to the event. This code will be sent the to
monitoring station’s automation software. The CID event code is a 3-digits code.
SIA Defines the reporting code assigned to the event. This code will be sent the to
monitoring station’s automation software. The SIA event code is a 2-letter code.