16
Chapter 5: System Configuration
Chapter 5: System Configuration
This chapter guides you through the steps required to configure the IPR512 Receiver through a
web browser connection using the IPR512 Receiver Account Management System.
Accessing the IPR512 Receiver Account Management System
In order to access the IPR512 Receiver Account Management System, the IPR512 must be
connected to the same network as the PC. Once a connection has been established
configuration settings for your IPR512 Receiver can be set. For more information on how to
configure the settings through the LCD menu, refer to “Chapter 6: IPR512 Receiver LCD
System Configuration” on page 42.
To Access the IPR512 Receiver Account Management System
1. Launch your web browser from a computer on the network connected to the IPR512
Receiver’s LAN port.
2. Enter the LAN IP address of IPR512 Receiver in the address bar of your web browser. You
are now presented at the Login page. Speak to your network administrator to obtain an IP
Address and Subnet Mask that will permit access to the IPR512 Receiver on your network.
Note: If you cannot connect to the IPR512 Receiver Account Management System, please verify that the LAN IP address was
correctly entered into the address bar. If an error page is displayed, the IPR512 Receiver’s IP address and Subnet Mask must
be changed through the LCD menu on the IPR512 Receiver. For more information on how to change these settings, refer to
“Chapter 6: IPR512 Receiver LCD System Configuration” on page 42.
Figure 15: Accessing the IPR512 Receiver Account Management System
3. Enter your Username. Default username is “admin”.
4. Enter your Password. Default password is “admin”.
5. Click
Login
.
Note: When you have logged into the system, it is strongly recommended that the default password be changed for security
purposes, note that the username cannot be changed.
Summary of Contents for IPR512
Page 1: ...IPR512 GPRS IP Monitoring Receiver V1 2 Operations Manual...
Page 63: ......
