![background image](http://html1.mh-extra.com/html/paradox/digiplex-evo-apr-prt3/digiplex-evo-apr-prt3_programming-instructions-manual_3610974029.webp)
28
NOTE 1: 000 = Occurs in all areas enabled in the system (refer to the appropriate control panel Programming Guide).
001 = Area 1
003 = Area 3
005 = Area 5 (EVO96)
007 = Area 7 (EVO96)
002 = Area 2
004 = Area 4
006 = Area 6 (EVO96)
008 = Area 8 (EVO96)
255 = Occurs in at least one area enabled in the system.
NOTE 2: This TLM trouble event can only be used with EVO96 control panels that have one dialler.
NOTE 3: This TLM trouble event can only be used with DGP-848 control panels or EVO96 control panels that have one dialer.
NOTE 4: This event cannot be used for a module’s PGM programming.
*
If a Keyswitch Input is used, the input must be defined as “Generates a Utility Key Event on Open” or “Generates a Utility Key Event on
Open and Close”. If a remote control is used, the remote control button must be defined as a Utility Key button.
†
Actions that Activate a Utility Key Event
064
Status 1
See
Note 1
on page 28
Armed
000
000
Force Armed
001
001
Stay Armed
002
002
Instant Armed
003
003
Strobe Alarm
004
004
Silent Alarm
005
005
Audible Alarm
006
006
Fire Alarm
007
007
065
Status 2
See
Note 1
on page 28
Ready
000
000
Exit Delay
001
001
Entry Delay
002
002
System in Trouble
003
003
Alarm in Memory
004
004
Zones Bypassed
005
005
Bypass, Master, Installer
Programming
006
006
Keypad Lockout
007
007
066
Status 3
See
Note 1
on page 28
Intellizone Delay Engaged (see
Note 4 on page 28)
000
000
Fire Delay Engaged
001
001
Auto Arm
002
002
Arming with Voice Module (set
until Exit Delay finishes)
003
003
Tamper
004
004
Zone Low Battery
005
005
Fire Loop Trouble
006
006
Zone Supervision Trouble
007
007
067
Future Use
Future Use
Future Use
Future Use
Future Use
Event
Group
Event
Feature Group
Feature
Start #
End #