PARADOX INSIGHT HD77, Installation Manual

Page: 37 / 68

37 Configuring PIR Settings
Configuring PIR Settings with Keypads
To configure PIR settings with Keypads:
1. Press and hold the [ 0 ] key.
The Installer Code screen opens in the LCD prompting to enter an Installer Code.
2. Enter your Installer Code .
The Section screen opens.
Note:
The default installer code is 000000 .
3. Key- in [ 4003 ].
The Module Programming screen opens.
4. Key-in the HD77 camera Serial Number .
The Module Section screen opens.
5. Configure PIR LED Display settings:
a. Key-in Section [
001
].
The 001 Module Data screen opens.
b. Key-in the value 1 (On) to display the LED #3 red indicator when PIR motion is detected OR :
Do not enter a value. The PIR LED Display indicator will not light up when PIR motion is detected.
Note:
• The default PIR LED Display value is 1 ( On ).
• Do not configure Options 2 - 8
c. Select Enter.
The 002 Module Data screen (sensitivity levels) opens.
6. Configure PIR Sensitivity Level settings:
a. Key-in Section [ 002 ].
b. Select the required PIR sensitivity level value: between 000 - 004 with the up/down arrows.
Note:
The default PIR sensitivity level is 002 .
c. Select Enter.
The 003 Module Data screen (security levels) opens.
7. Configure PIR Security Level settings:
a. Key-in Section [ 003 ].
b. Select the required PIR security level value between 0-2 with the up/down arrows.
Note:
The default PIR security level is 0 .
c. Select Enter save the settings.
The PIR settings are configured.