14
•
Grill Island Preparation
GSL-SB2B Double Side Burner Operator Manual
Paradise Grills manufactured Islands use adjustable footers to allow sufficient airflow for effective
ventilation (Figure 5).
Figure 5 Air Gap Footers
Double Burner Location
Consider important factors such as wind exposure and foot traffic patterns when choosing a location for the
burner unit. Locate the burner unit outdoors in a well-ventilated area on a level, stable surface and with safe
clearance from combustible construction (see Clearances below). Ensure your burner unit is positioned
safely away from anything that can catch fire.
Position a freestanding burner unit so the prevailing wind blows into the front control panel (at your back
when cooking) to allow for proper front to rear airflow. A built-in burner unit enclosure in areas with
prevailing winds should be protected by a wind barrier, wind deflector, or wind guard. Winds directly hitting
the back of the burner unit may cause unsafe and improper operation.
•
This burner unit is designed for outdoor use only.
•
DO NOT use this burner unit inside a building, garage, or
enclosed area.
•
DO NOT use this burner unit in or on a recreational vehicle,
trailer, boat, or any other moving installation.
As with any gas cooking appliance, harmful carbon monoxide is produced during the combustion process
that should not be allowed to accumulate in a confined or enclosed space. Because hot air rises above the
burner unit while in operation, covered locations should be avoided.
•
Do not locate the burner unit under an overhang or awning
•
Do not place this burner unit under or near windows or vents that can be opened into your home
•
Always use CAUTION when using the burner unit near glass, vinyl siding or other temperature-
sensitive construction materials
o
Consider increasing the clearance around the burner unit to avoid damage to such materials
o
Check with the manufacturer of the construction materials for guidance
