EN-6
BREAK-IN
Although your Soundscape will sound great right ‘out of the
carton’, it will sound even better when broken in. Allow it to
operate for several hours before you begin to listen critically.
CLEANING
Do not use strong or abrasive cleaners on your new
Soundscape. Simply wipe the cabinet gently with a
soft, damp cloth.
PLACEMENT
We recommend centering the Soundscape directly above
or below your TV/video display. The system’s menu options
allow you to optimize acoustic performance for flat surface
placement (i.e. shelf or credenza) or for wall mounting. Learn
more about these options below or refer to the later section,
‘The Menu System.’
ON A FLAT SURFACE — FEET ATTACHED
ACTION REQUIRED!
When installing your Soundscape
on a flat surface (shelf or credenza) you must leave the
feet attached for stability and for best results you should
adjust the unit’s equalization and voicing to make sure
you achieve the best sound possible for the location.
Use the Soundscape’s Menu System to choose:
INSTAL
[INSTALL] >
ON.SHELF
[ON SHELF].
Stability Feet (Fig. 1)
For stability, on a flat surface the Soundscape’s factory-
installed rubber feet must remain attached.
If wall mounting Soundscape, use a screwdriver to remove the
feet and store them in a safe place for future use.
NOTE:
Stability feet (Fig. 1) are recessed, so it is not
absolutely necessary to remove them before wall
mounting — it is more a matter of preference.
Stability Feet
Fig. 1
