EN-20
Menu Option: DISPLAY
DISPLY
[DISPLAY]
:
Enter the
‘DISPLY’
submenu by pressing
the ‘Scroll Right’ directional button. The settings in this
menu allow you to adjust the brightness of the Soundscape’s
display and configure the display to turn on and off
automatically.
DISPLY
[DISPLAY] >
BRIGHT:
This option configures the
Soundscape’s display to be on at full brightness.
DISPLY
[DISPLAY] >
DIM:
This option configures the
Soundscape’s display to be on at a reduced brightness when
the Soundscape is on. Activate the option by pressing the
‘Select’ button and the Soundscape will respond with
‘SET’.
DISPLY
[DISPLAY] >
AUTO OFF:
This option configures the
Soundscape’s display to be on at a full brightness when a
setting (such as volume or input) is changed. After a few
seconds, the display will turn off. Activate by pressing the
‘Select’ button and the Soundscape will respond with
‘SET’
.
Menu Option: INSTALL
‘INSTAL’
[INSTALL]
:
Enter the
‘INSTAL’
submenu by pressing
the ‘Scroll Right’ directional button. The settings in this
menu will adjust the Soundscape’s equalization and voicing
for optimal performance on the wall or on a flat surface (i.e.
credenza or shelf) installation.
‘INSTAL’
[INSTALL >
‘ON WALL’:
This option configures the
Soundscape’s audio output to sound best in an on-wall
installation. Activate the option by pressing the ‘Select’
button and the Soundscape will respond with
‘SET’
.
‘INSTAL’
[INSTALL] >
‘ON.SHELF’
[ON SHELF]
:
This option
configures the Soundscape’s audio output to sound best on
a flat surface (credenzal or shelf) installation. Activate the
option by pressing the ‘Select’ button and the Soundscape
will respond with
‘SET’
.
Menu Option: SUB
SUB:
Enter the
‘SUB’
submenu by pressing the ‘Scroll Right’
directional button. Here you may configure the Soundscape for
external subwoofer integration.
PLEASE NOTE:
When you select the
‘SUB’
‘WIRED’
option in the Menu, a wireless connection is no longer
viable until the menu option for wireless is turned
back on. However, when you select
‘SUB’
‘WIRELES’
[WIRELESS] in the menu, the Soundscape will still
support a wired subwoofer connection.
It is possible to connect multiple wired subwoofers using
a ‘Y’ splitter attached to the subwoofer cable, wireless
receiver, or an output on the rear of your subwoofer that
is designed to daisy chaining multiple subs. See your
Paradigm dealer for more information.
‘SUB’
>
INTERNL’
[INTERNAL]
:
This option allows the
Soundscape to handle all bass information. No external
subwoofer is required or allowed when this mode is
activated. Activate the option by pressing the ‘Select’ button
and the Soundscape will respond with ‘
SET’.
‘SUB’
>
‘WIRED’ :
This option configures the Soundscape
to use an external subwoofer connected with a cable to the
Soundscape’s Sub Out RCA connection. Activate by pressing
the ‘Select’ button and the Soundscape will respond with
‘SET’
.
TIP!
Reference your external subwoofer’s Owners Manual
to learn how to correctly adjust level and phase control
to achieve seamless blending with the Soundscape.
‘SUB’
>
‘WIRELES’
[WIRELESS]
:
Enter the
‘SUB’
‘WIRELES’
[WIRELESS] submenu by pressing the ‘Scroll Right’
directional button. Using the included wireless subwoofer
receiver you can sync the Soundscape with a Paradigm or
other brand of subwoofer.
