Sa3
Sa3
S5
S4B
S8
S4A
S4B
S5
Sa1
Sa1
Sa2
Sa2
S7B
S7A
S4A
S8
Step 10
I
nsert the small ends of the
L-Shaped Tube (Left) (S4A)
and
L-Shaped Tube (Right) (S4B)
into the sockets of the
Elbow Tube (S8)
. The welded bracket of the
L-Shaped Tube
(Left)(S4A)
and
L-Shaped Tube (Right) (S4B)
should face outwards.
Insert the small end of the
Straight Tube (S5)
into the opening of the
L-Shaped Tube
(Left)(S4A)
and
L-Shaped Tube (Right) (S4B).
Align the holes and secure with two
Binder Post and Bolt Sets (Sa3).
Then tighten
using the
5mm Allen Wrench
and
10, 13mm Wrench
provided.
Align the
Handlebar Base Tube (Left) (S7A)
with the corner of the
L-Shaped Tube (Left)
(S4A)
Then align the holes and secure using a
Binder Post and Bolt Set (Sa1)
and a
Binder
Post and Bolt Set (Sa2).
Align the
Handlebar Base tube (Right) (S7B)
to the corner of the
L-Shaped Tube (Right)
(S4B)
align the holes and secure using a
Binder Post and Bolt Set (Sa1)
and a
Binder Post
and
Bolt Set (Sa2)
. Then tighten using the
5mm Allen Wrench with Phillips Screwdriver
and
5mm Allen Wrench.
Do not tighten bolts until instructed to do so.
ASSEMBLY
Step 11
2
4
