Aa1
Aa1
Aa1
A11
A10
A10
1
2
Step 1
A2
A
1
Remove the
two sets
of
p
re-installed
Hardware
(Ba5)
from the
Glinder Attachment (B5).
Attach the
Glinder Attachment (B5)
onto the the
Top Bar (A2),
and tighten with pre-
installed
Hardware (Ba5)
that were previously removed.
Remove the two sets of
p
re-installed
Hardware
(
Aa1
)
from the
Ladder Leg Supports
(
A10
)
.
Attach
Ladder Leg Supports (A10)
onto the
Top Bar (A2)
, then i
nsert the
Ladder Top Bar
(
A1
)
into
the socket of the
Top Bar
(
A2
)
and align the holes.
Tighten the two sets of pre-installed
Hardware (Aa1)
that were previously removed.
16
ASSEMBLY
