11
art.nr
.8822145, Rev
. 2021-03 Publ. 2021-05-06
Panthera
AB reserves the right to make technical changes if required
Panthera
AB reserves the right to make technical changes if required
SETTINGS
3. The footplate settings
(Fig. 7, 8, 9, 10)
Height
:
(Fig. 7)
1. Loosen the screws (1) using
a 4 mm Allen key.
2. Adjust to the desired height. Make it
equal on both sides.
3. Tighten the screws (1).
Folding:
(Fig. 8)
Upwards
:
1. Release the latches (1) from the stoppers
(2) by pulling them backwards.
2. Fold up the footplate (3) until it stops.
Down
:
1. Fold the footplate down (3) until it stops
and press so that it snaps into place against
the stoppers (1).
2. Lock the footplate around the stoppers (2)
with the latches (1) by pulling them forwards.
Depth
:
(Fig. 9)
1. Loosen the screws (1) using
a 4 mm Allen key.
2. Screw the screws back into hole (2)
to move the footplate forwards 30 mm.
Angle
:
(Fig. 10)
1. Loosen the screws (1) usinga 4 mm Allen
-
key.
2. Adjust to the desired angle.
3. Tighten the screws (1).
Fig. 7
Fig. 8
Fig. 9
Fig. 10