16
art.nr
.8822145, Rev
. 2021-03 Publ. 2021-05-06
Panthera
AB reserves the right to make technical changes if required
ACCESSORIES
Anti-tip devices
(Fig. 19, 20)
The two anti-tip devices are
extremely important accessories
which must be
folded out
and correctly adjusted to provide adequate protection against the user tipping backwards.
PLEASE NOTE! The anti-tip devices
must not be used as a “tip assist”
to lift the front
wheel of the wheelchair to get over thresholds, curbs, etc.
Folding out
the anti-tip devices
:
(Fig. 19)
1) Press the knob on the anti-tip device firmly (1).
2) The anti-tip device automatically folds out to the extended position, so that it points
backwards (2).
3) Repeat with the second anti-tip device.
Folding in
the anti-tip devices
:
(Fig. 19)
1. Press and hold the knob (1).
2. Turn the anti-tip device so it goes under the seat with your hand on the anti-tip device
(2).
3. Repeat with the second anti-tip device.
Installing
the anti-tip devices:
(Fig. 19, 20)
1) Back the wheelchair up against e.g. a wall; check that the distance (3) from the rear
edge of the anti-tip wheel is
flush with or behind the drive wheel
, it
must not be in
front
.
2) Adjust if necessary by fixing the wheel tubing in any of the five positions (4).
Fig. 19
Fig. 20
