20
art.nr
.8822145, Rev
. 2021-03 Publ. 2021-05-06
Panthera
AB reserves the right to make technical changes if required
ACCESSORIES
Push bar
Adjustable, removable push bar for transporting users in wheelchairs for longer distances.
Mounting the push bar
:
(Fig. 29, 30)
1. Squeeze the handle together (1) to open the clamp (2) that should go around the lower
frame tube. (3)
2. Release the handle when the clamp (2) is around the tube. (3)
3. Open clamps A and B and place A under and around the (5) backrest bow.
4. Move (6) clamp B forwards over the backrest bow and hook (7) the front edge over the
front edge of clamp A.
5. Press clamp B so that the orange flap lock clamp B with a click.
Dismounting the push bar.
(Fig. 31, 29)
(Fig. 31)
1. Press (1) the orange flap inwards towards the backrest and fold (2) up clamp B.
2. Loosen clamp B at the front edge from clamp A (3) which is folded down so that it re
-
leases from the tube.
(Fig. 29)
3. Squeeze the handle together (1) to open the clamp (2) so that it can be removed from
the frame tube. (3)
4. Remove the push bar from the wheelchair.
Installing the push bar
(Fig. 32)
Adjusting the height of the push bar
:
1. Unfold the locking arm (1) on the back of the push bar.
2. Set the desired height and fold the locking arm back into place.
Adjusting the angle of the handle
:
1. Press the large button (1) at the top of the push bar.
2. While pressing the button (1), set the angle of the drive handle.
3. Stop pressing the button (1) when the desired angle is reached.
