Subjec t to c hange without notic e
290297
Page 8/20
F r o nt Pa ne l
The ergonomic ally designed front panel displays all information at a glanc e and enables direc t c ontrol
of operating parameters suc h as speed, ramp setting etc .
1.
On/off switc h (with automatic c ut-out)
2.
LCD display
3.
Control LEDs
4.
Super Jib operation on/off
5.
Ha ndset programming on/off
6.
Speed selec tor
7.
Ramp selec ting switc h
8.
"POWER OFF" safety switc h
9.
Manual c ontrol switc h
110.
Storage/rec all keys for programmed
movements
The manual c ontrol switc h (9) is applic able for c olumn movements in both direc tions and at any speed.
More than 250 c olumn movements c an be programmed at any position or speed and rec alled at will
by using the storage/rec all keys (10). The manual func tioning is nevertheless maintained. The position
ac c urac y leaves nothing to be desired.
MAIN SWITCH
Combination of power on/off, safety power off switc h on handset
(on/off switc h):
and fuse (that will switc h off at a c onstant c urrent exc eeding 10 A).
LCD-DISPLAY:
shows the momentary motor voltage (with one battery approx. 24 V, with two
batteries approx. 48 V)
CONTROL LEDS:
Power
yellow LED; will light up when the dolly is turned on
Brake open
green LED; will light up when the brake is open. If the dolly is not in operation
for longer than 120 sec onds, the brake will c lose automatic ally and the LED will
go out.
Battery empty/error
red LED; will light up when batteries are empty. The LED will start blinking in
c ase of an error. The error c an be determined by removing the elec tronic s
c over and looking at the display on the left side of the elec tronic s housing:
b. (on)
battery empty
d. (blinking)
fault at rotary enc oder
E. (blinking)
fault at end switc h
H. (blinking)
fault at handset
L. (blinking)
c urrent exc eeding normal value
