Subjec t to c hange without notic e
290297
Page 7/20
Get t i ng St a r t e d
1.
Before switc hing the Panther on, make absolutely sure that the entire lift, panning and operating
range of dolly and ac c essories is c lear.
2.
Supply the dolly with elec tric ity as desc ribed in "Power Supply" p. 10, 11. Note: Please fully
c omply with instruc tions.
3.
Chec k if handset, c able and dolly are properly c onnec ted.
4.
Set the switc hes on front panel (7) as desired (see "Front Panel", p. 6, 7, 8).
5.
Turn the Panther on at the main switc h. The c ontrol LED "POWER" on the front panel will light up,
showing that the Panther is on. Make sure the battery (batteries) is (are) fully c harged. You c an
keep the main switc h "on" due to the "On-Off" - switc h loc ated
on the handset (16) whic h enables you to switc h the dolly "on" or "off".
The Dolly does not turn on if one of these two switc hes is off.
6.
Using the handset (16), bring the c olumn to the desired position. Press the manual c ontrol switc h
forward to elevate the c olumn, pull bac k to lower the c olumn. This switc h also determines the
speed of travel, ac c ording to the pressure used.
Note: When not using the c olumn lift, switc h the Panther off to c onserve battery power.
The Super Panther has a "On-Off" - switc h loc ated on the handset, next to the manual c ontrol
switc h (red knob). This switc h is used to stop the elevating mec hanism during unintentional
movements.
The Super Panther III may not be operated with mains power units + c hargers sold before 1
January, 1996.
