11
© 2007
Wohler Technologies, Inc.
and
PANORAMAdtv
ALL rights reserved
HDMon Series
User Manual P/N
821676
Rev-
A
HDmon Application
Console Baud Rate
Display Info
Gateway
IP Address
Network Mask
Name Server, DNS
Network Port
Restart Ctrl
Secure Address
Console Operation
The
Wohler Setup Menu
is where the
HDMon
configuration menu is accessed and where network information is
entered. When entering network information, press
ENTER
to accept the input values. See the chart below for a
description of item selections in this menu.
A
B
D
G
I
M
N
P
R
S
Accesses the HDMon setup menus
View/enter the Console Baud Rate (changes the factory default).
Displays the HDMon version information.
View or enter the network Gateway address (Default =
0.0.0.0
).
View or enter the network IP Address (Default =
0.0.0.0
). Selects DHCP address
assignment at boot.
View or enter the Network Mask address (required for fixed IP operations)
View or enter the network Name Server, DNS (Default =
0.0.0.0
).
View or enter the Network Port (Default =
Port 0
, needed for use with NETMON)
Reboots the Console application
(Settings changed will not take effect until the monitor is restarted).
View or enter the network Secure Address (Default =
0.0.0.0
). Default address allows
any client to connect to the HDMon. If an address is entered, only a client with the
entered address will be able to connect.
Item Name
Item
Item Description
The
HDMon Setup Menu
(below) is where the
HDMon
unit is configured for such things as
Hot Key
,
Remote
Input
and
User Button
assignment,
Unit Name
, and
Power Up Mode
.
Note:
The
Remote Cfg
(
R
),
User Cfg
(
U
), and
Exit HDMon
(
X
) selections are also available in any of the sub-menus
accessed through this menu.
> Wohler Setup Menu
> HDMon Setup Menu
Hot Key Cfg
(Menu)
Unit Name
Power Up Mode
Remote Cfg
(Menu)
User Cfg
(Menu)
Exit HDMon Menu
H
N
P
R
U
X
Enters the
Hot Key Configuration Menu
View/enter an arbitrary name to be associated with the
HDMon
unit.
Toggles
Power Up Mode
On/Off. Determines HDMon state when con-
nected to power source (plugged in); ON = power on, OFF = remains off.
Enters the
Remote Configuration Menu.
Enters the
User Button Configuration Menu.
Exits the
HDMon Setup Menu
and returns to
Wohler Setup Menu.
Item Name
Item
Item Description
See the chart below for a description of menu items. The
Hot Key Config. Menu
,
Remote Cfg Menu
, and
User Cfg
Menus
are described on the following pages. When entering a
Unit Name
, press ENTER to accept the input value.
