SCANNDY USER GUIDE
Page 11
SCANNDY CRADLE CONFIGURATION PROCEDURE
The Scanndy Cradle units can be configured to fit the user’s specific application.
The configuration parameters are stored in a non-volatile memory which is retained
even if power is lost.
To configure your Scanndy Cradle by scanning configuration bar codes, you first need to establish a
Bluetooth connection between Scanndy device and Cradle by scanning the serial number label on
the bottom of the Cradle device. The devices are successfully connected when the blue LED is
lighting on both devices.
To set the Scanndy device into the cradle configuration mode, please scan the following
Barcodes.
Start Scanndy Configuration
End of Scanndy Configuration
Once the devices are successfully connected and the Scanndy device is set into
Cradle Configuration Mode, please proceed the Cradle configuration regarding the
Configuration flowchart
1) Locate the START CONFIGURATION bar code to set the Cradle unit into SETUP mode.
2) Scan the labels representing the parameter to be changed. You can setup various
parameters within one setup procedure.
3) Scan the END CONFIGURATION bar code to save the changed parameters and exit the
Setup mode.
NOTE:
You can abort the actual configuration procedure by scanning the
ABORT CONFIGURATION bar code on page 4. All changed parameters will be set back to the values
they had before you start the configuration procedure.
