Installation
3
Black/White LCD Mini-Touch Panels
Installation
Mounting the Mini-Touch Panels
The following paragraphs describe mounting the Decor and rack-mount touch panels. TiltScreen
touch panels can be placed on any flat surface.
Decor style panels with low-profile Back Boxes
The touch panel must always be installed with the release slot located at the bottom.
1.
Cut out the surface using the dimensions shown in FIG. 1.
2.
Carefully insert a flat-blade screwdriver into the release slot on the touch panel’s faceplate and
remove the engraved overlay.
3.
Place the touch panel into the cutout and mark the screw insert positions, as shown in FIG. 1.
4.
Remove the touch panel and drill four #6-32 insert holes. Then, place a threaded insert into
each hole.
5.
Disconnect the AXlink connector from the Central Controller.
6.
Fasten the low-profile Back Box to the surface using the #6-32 machine screws supplied with
the enclosure.
FIG. 1
Decor style and low-profile Back Box output dimensions
