VeriSafe Network Module User Guide, B21176 rev 1 [English] 4
September 2022
AVT STATUS PAGE SECOND CARD
Data in this card is updated every 2 seconds . For single phase systems the view shown is determined by
selection on card 1 (item 6 AC/DC selection) .
FIGURe 3
. AVT STATUS PAGE SECOND CARD VIEWS
Three-Phase View
Single-Phase View
DC View
1.
AVT Connection Status Indicates status of the connection between the isolation
module and network module .
OK
DISCONNECTED
2.
Voltage presence
Reflects the status of the voltage presence indicators (red LEDs) on the indicator module
and voltage presence contacts on the network module .
3.
Voltage Measurements
Measured peak voltage line
to ground
Calculated RMS and line to
line voltages
AC Range
Accuracy
40*-200 VAC
± 4V
201-300 VAC
± 2%
301-1000 VAC
± 1 .5%
DC Range
Accuracy
40*-300 VDC
± 9V
301-700 VDC
± 2%
701-1000 VDC
± 1 .5%
*The Network module is designed to report measured
values between 40-1000 V . The Network module is not
optimized to report voltages under 40V . However, the
absence of voltage indication from the AVT utilizes a
separate circuit that is highly accurate and optimized for
the 3V threshold .
