© Panduit Corp. 2013
USER MANUAL
TDP43HE, TDP43HE/E,
TDP46HE & TDP46HE/E
B20730-01
Page 37 of 73
8-2013
Print Width
812 dot
Self Test …
Printing …
1/1
Printer Mode
Description
Tear Off
Next label top of form is aligned to the print head burn
line
Peel Off
Enable the label peel off mode.
Cutter
Enable the label cutter mode.
Note: If printing from enclosed software/driver, the software/driver will send out the
command, which will overwrite the setting set from the front panel.
3.1.2-5 Print Width:
Print Setup
5/17
Tear Off
Print Mode
>
Print Width
This option is used to set print width. Press the
button to move the cursor from left
digit to right digit, and press the
button to set the value from “0” to“9” or “dot” to “mm”.
Press the
button to set the value into printer. Press
key to cancel the
setting and return to the previous menu.
Note: If printing from enclosed software/driver, the software/driver will send out the
command, which will overwrite the setting set from the front panel.
3.1.2-6 List Fonts:
Print Setup
6/17
>
List
Fonts
List
Images
List
Formats
This feature is used to print current printer available fonts list to the label. The fonts are stored
in the printer’s DRAM, Flash or optional memory card. Press
button to print the list.
