© Panduit Corp. 2013
USER MANUAL
TDP43HE, TDP43HE/E,
TDP46HE & TDP46HE/E
B20730-01
Page 31 of 73
8-2013
Print Mode
2/6
>
Batch Mode
Peeler Mode
Cutter Mode
The following 2 figures are the printouts of DIRECTION 0 and 1 for your reference.
DIRECTION 0
DIRECTION 1
Note: If printing from enclosed software/driver, the software/driver will send out the
command, which will overwrite the setting set from the front panel.
3.1.1-4 Print Mode: (None/Batch Mode/Peeler Mode/Cutter Mode/Cutter Batch)
This option is used to set the print mode. Printer default setting is Batch Mode. When
entering this list, the print mode on the right side of “
>
” icon is the current printer setting.
Press
and
to select the different print mode and press
button to
enable the setting. Press
key to cancel the setting and return to the previous
menu.
Printer Mode
Description
None
Next label top of form is aligned to the print head burn line
location. (Tear Off Mode)
Batch Mode
Once image is printed completely, label gap/black mark will
be fed to the tear plate location for tear away.
Peeler Mode
Enable the label peel off mode.
Cutter Mode
Enable the label cutter mode.
Cutter Batch
Cut the label once at the end of the printing job.
Print Setup
4/12
Density
Direction
>
Print Mode
