© Panduit Corp. 2013
USER MANUAL
TDP43HE, TDP43HE/E,
TDP46HE & TDP46HE/E
B20730-01
Page 32 of 73
8-2013
Offset
+000
Shift Y
+000
Reference Y
000
Note: If printing from enclosed software/driver, the software/driver will send out the
command, which will overwrite the setting set from the front panel.
3.1.1-5 Offset:
Print Setup
5/12
Direction
Print Mode
>
Offset
This option is used to fine tune media stop location. Press the
button to move the
cursor from left digit to right digit, and press the
button to set the value from “+” to “-” or
“0” to “9”. Press the
button to set the value into printer. Press
key to
cancel the setting and return to the previous menu. The default value is +000.
Note: If printing from enclosed software/driver, the software/driver will send out the
OFFSET command, which will overwrite the setting set from the front panel.
3.1.1-6 Shift X & Shift Y:
This option is used to fine tune print position. Press the
button to move the cursor
from left digit to right digit, and press the
button to set the value from “+” to “-” or “0”
to “9”. Press the
button to set the value into printer. Press
key to
cancel the setting and return to the previous menu. The default value is +000.
Note: If printing from enclosed software/driver, the software/driver will send out the
SHIFT command, which will overwrite the setting set from the front panel.
3.1.1-7 Reference X & Reference Y:
This option is used to set the origin of printer coordinate system horizontally and vertically.
Press the
button to move the cursor from left digit to right digit, and press the
button to set the value from “0” to “9”. Press the
button to set the value into
printer. Press
key to cancel the setting and return to the previous menu. The
default value is 000.
Print Setup
7/12
Offset
Shift X
>
Shif
t
Y
Print Setup
9/12
Shift Y
Reference X
>
Referenc Y
