© Panduit Corp. 2013
USER MANUAL
TDP43HE, TDP43HE/E,
TDP46HE & TDP46HE/E
B20730-01
Page 30 of 73
8-2013
Speed
6
Density
8
Direction
0
3.1.1-1 Speed:
Use this option to setup print speed. The increment/decrement is 1 ips. Press
key to raise the print speed, and press
key to decrease print speed. Press
key to set it into printer. Press
key to cancel the setting and return
to the previous menu.
Note: If printing from enclosed software/driver, the software/driver will send out the
SPEED command, which will overwrite the setting set from the front panel.
3.1.1-2 Density:
Use this option to setup printing darkness. The available setting is from 0 to 15, and the step
is 1. Printer default density is 8.You may need to adjust your density based on selected
media. Press
and
to increase/decrease the printing darkness. Press
key to enable the setting. Press
key to cancel the setting and
return to the previous menu.
Note: If printing from enclosed software/driver, the software/driver will send out the
DENSITY command, which will overwrite the setting set from the front panel.
3.1.1-3 Direction:
The direction setting value is either 1 or 0. Use this option to setup the printout direction.
Printer default printout direction is DIRECTION 0.
Press
key to set the direction as 1, and
to set it as 0, and
key to
enable the setting. Press
key to cancel the setting and return to the previous
menu.
Print Setup
1/12
>
Speed
Density
Direction
Print Setup
2/12
Speed
>
Density
Direction
Print Setup
3/12
Speed
Density
>
Direction
