Panduit MP300 Operator'S Manual Download

Page: 9 / 66

Top

Using the printer with

Frame and Table Lists

Symbol List

Specifications

Technical Support

Start Here

2. Installing a tape cartridge

CAUTION

• Make sure that the power is turned off.

• Be sure to use the specified tape cartridge.

• Make sure the top cover is closed firmly.

• If you opened the top cover while a tape cartridge is

installed, check that the tape end is put into the tape

eject slot before beginning operation.

• Take care to keep the label for detecting the tape

cartridge and the sensor of the printer clean.

Otherwise, tape may no longer be detected correctly.

• Do not touch the sensor directly with your fingers.

Label for detection

Sensor

1. Rewind the ink ribbon if

needed.

Use a pen
or a pencil.

2. Open the top cover.

Top cover

3. Install a tape cartridge.

Put the tape end
into the tape eject
slot.

4. Close the top cover.

Summary of Contents for MP300



































































Search results

Summary of Contents for MP300

Reviews:

Related manuals for MP300

Brands by name

Popular brands

Panduit MP300, Operator'S Manual

Search results

Summary of Contents for MP300

Reviews:

Related manuals for MP300

Brands by name

Popular brands