AT-OME-PS62
34
webGUI
System
Network
MAC Address
- Displays the MAC address of the unit.
IP Mode
- Switch between static and DHCP IP modes.
IP, Netmask, Gateway - T
his will display the unit’s current DHCP IP settings. When set to static, fill in the IP
address, netmask, and gateway.
Telnet Port
- Set the telnet port if needed for control. Default port is 23.
Telnet Login Mode
- Toggle telnet login mode on and off. If on, a username and password will be required to
control the unit via telnet.
Telnet Timeout
- Set the amount of time between actions before the current user is logged out. Default is 10000
seconds.
Hostname
- Set the name for the matrix, this will show up in network discovery.
USB Host
Follow USB
- Sets the USB hosts to follow the most recently connected device. If a host is connected, then
it will auto switch to that source. If the current host loses signal or stops broadcasting, it will fall back to the
previously connected active device.
Manual
- Select which host will be used. Select between local USB Hosts, USB-C, and compatible connected
HDBaseT devices.
Follow Video
- Sets the USB hosts to follow the input selection. If an input on the transmitter is selected, the
USB will switch to the transmitter’s host ports, if a source on the switcher is selected, it will switch to the
PS62’s host port.
Select System from the top navigation to adjust network, USB, and general system options.
